Hydrostatic Pressure Testing Machine is used for the determination
of the resistance to internal pressure of thermoplastic pipes,
fittings and assemblies for the conveyance of fluids
Applications:
Hydrostatic pressure testing machines are applicable to a wide
range of thermoplastic pipes, fittings, and assemblies used for
fluid conveyance, including but not limited to pipes, fittings, and
assemblies made from materials such as Polypropylene (PP),
Polyethylene (PE), Polyvinyl Chloride (PVC), Chlorinated Polyvinyl
Chloride (PVC - C), and Acrylonitrile Butadiene Styrene (ABS). This
encompasses various types of products, including extruded pipes,
injection - molded pipes, and assembled specimens with or without
hydrostatic thrust. For instance, it can be used for hot - melt
butt - welded pipe sections, specimens containing one or several
pipe fittings, and saddle branch test specimens. The nominal
outside diameter (dn) of the tested pipes can range from
relatively small sizes (e.g., 25 mm) to larger diameters (e.g.,
greater than 315 mm), depending on the specific requirements of
different specimen types.
Purposes:
The primary purpose of hydrostatic pressure testing machines is to
determine the resistance to internal pressure of the above -
mentioned plastic pipes, fittings, and assemblies. By subjecting
products made from materials like PP, PE, PVC, PVC - C, and ABS to
a specific internal pressure under controlled conditions for a
certain period, the machine can assess their ability to withstand
pressure without failure, such as leakage, bursting, or excessive
deformation. This test is crucial for ensuring the quality, safety,
and reliability of plastic pipes and related components used in
fluid conveyance systems, which are widely applied in fields such
as water supply, drainage, gas transportation, and industrial fluid
transfer.
Product Configuration:
1. Pressure control system(main frame);
2. Pressure supply system(pressure source);
3. Test tank and temperature control system;
4. End closures: φ8~1800mm(according to customers requirement).
5. Refrigeration system(according to customers requirement)
Product Characteristics:
1. Users can effortlessly set test parameters using an operating
terminal that combines a touchscreen or a PC.
2. Occupying an area of less than one square meter, it can produce
as many as 50 different pressures, including the water supply
pressure.
3. Its intelligent recognition capacity allows it to identify the
size and material of the sample and then formulate an optimized
pressure - boosting plan along with an algorithm.
4. This device stands out for its precise pressure control. The
option to adjust the input pressure of each individual module
separately helps to decrease the wear of solenoid valves and
guarantees a long - lasting operation.
5. Every metal part that comes into contact with the medium is made
of high - quality stainless steel.
6. The display interface, designed with user convenience in mind,
offers various language options, fully meeting the diverse
requirements of customers.
7. Conducting pressure calibration during the testing is simple,
and the system has the option to continue running while calibration
is in progress.
8. It provides protection at multiple levels, covering electrical,
mechanical, and software aspects.
9. It enables smooth and dependable data communication through the
TCP/IP protocol.
Meet Standards:
ISO1167-2006, ASTMD1598-2004, ASTMD1599, ISO9080, CJ/T108,
ASTMF1335.
The free length of the specimens:
| Specimen Type | Free Length Requirements |
| Extruded Pipe Specimens | dn<315mm: ≥ 3dn and ≥ 250mm; dn>315mm: ≥ 2dn |
| Injection-molded Pipe Specimens | dn<50mm: 3dn; 50mm ≤ dn ≤ 110mm: ≥ 140mm |
| Assembled Specimens with Hydrostatic Thrust (Two Pipe Sections) | ≥ 3dn and ≥ 250mm (dn>315mm: ≥ 2dn if min. length not met) |
| Assembled Specimens with Hydrostatic Thrust (with Fittings) | ≥ 2dn and ≥ 150mm; dn>250mm: ≥ 1.5dn |
| Assembled Specimens with Hydrostatic Thrust (Saddle Branch) | ≥ 100mm |
| Assembled Specimens without Hydrostatic Thrust | = dn and ≥ 150mm |
Technical Parameters:
| Model | XGY-16C |
| Diameter range | Φ8-1800mm |
| Stations | 3, 5, 6, 12, 15, 18, 20, 25, 50, 100 etc can customized |
| Control mode | Micro-control, industrial PC control |
| Display mode | Industrial PC LCD color display |
| Storage mode | PC strorage |
| Print mode | Color printer output |
| Test pressure | Pressure range | 0.1-16MPa |
| Control accuracy | ±1% |
| Display resolution | 0.01MPa |
| Working range | 5%~100%FS |
| Indication error | ±1% |
| Test Timer | Timer range | 0~10000h |
| Timer accuracy | ±0.1% |
| Timer resolution | 1s |
| Power | 380V 50Hz three-phase four-wire 1.5KW |
| end caps models | from Φ8 to 1800mm |
| Water tank size | accoard to the pipe size |
| Temperature range | 15-95℃ |
| Dimensions (three stations) | 715×625×1700(mm)or others |
Support and Services:
Hydrostatic testing machine Plastic Pipe Hydrostatic Pressure
Testing Machine Technical Support and Service
We provide technical support for Hydrostatic Pressure Testing
Machines. Our experienced technical support team can provide:
- Machine installation and setup
- Troubleshooting and technical advice
- Repair and maintenance services
- Spare parts and consumables
- Software updates and upgrades
We are committed to providing excellent customer service and are
available to answer any questions you may have. If you have any
queries, please don't hesitate to contact us.
FAQ:
Q1: What is the brand name of the Hydrostatic testing machine
Plastic Pipe Hydrostatic Pressure Testing Machine ?
A1: The brand name for the Hydrostatic Pressure Testing Machine is
JHH, which is manufactured in Beijing, China.
Q2: What is the purpose of the Hydrostatic testing machine Plastic
Pipe Hydrostatic Pressure Testing Machine?
A2: The Hydrostatic testing machine Plastic Pipe Hydrostatic Pressure
Testing Machine is used to test the hydrostatic and bursting strength of plastic
pipe.
Q3: What type of components and materials can the Hydrostatic
Pressure Testing Machine test?
A3: The Hydrostatic Pressure Testing Machine can be used to test
plastic pipe, composite pipe (like PP-R, PP-B, PP-A, PVC, PE, PE-X
etc.
Q4: What is the accuracy of the Hydrostatic Pressure Testing
Machine?
A4: The Hydrostatic Pressure Testing Machine is accurate to within
0.1% of the full-scale reading.
