JSX-2000E computer control rubber rotorless vulcanizing instrument
Introduction:
The JSX-2000E computer control rubber rotorless vulcanizing
instrument adopts a computer-controlled imported temperature
controller for accurate temperature control. The computer processes
data in real time and can perform statistics, analysis, storage
comparison, etc. It is designed with humanization, easy to operate,
and accurate in data, providing accurate data for rubber formulas.
The buttons clicked by the mouse on the computer of this
vulcanizing instrument have the same function as the buttons on the
main panel, making it easy for users to operate. The software
interface of the computer is quite good, and it is extremely
convenient to use. Users can accurately measure the burning time,
positive vulcanization time, vulcanization index, maximum and
minimum torque, etc. It is an ideal equipment for controlling the
quality of rubber materials, rapid inspection, and rubber extrusion
research in the rubber industry.
The 2000E type rotorless vulcanizer is a new generation of
electromechanical integrated product launched by our factory. It
mainly consists of the host, sensors, computer, lower computer data
collector, printer, and electrical interlock.
Execution standards: ASTMD5289－95, ISO6502:1991, HG/T3709-2003.
Provide vulcanization curve and temperature curve chart. Single
curve testing, continuous testing of multiple curves, and
comparison testing of multiple curves can be performed on the same
interface. The data is stored in the database and all curve data
can be printed in real-time or historically.
Technical requirements for data processing:
The drawing format, curve and parameters are shown in figure 1
below:
figure 1
Technical specifications and specifications:
| Execution standards | GB/T16584,ISO-6502 |
| Mold cavity structure | Fully enclosed type |
| Temperature control range | Room temperature -200 ℃ |
| Temperature fluctuation | ≤ ±0.2℃ |
| Temperature display resolution | 0.01 ℃ |
| Torque range | 0-20N.M |
| Torque display accuracy | 0.001 N.M |
| Power supply | 50Hz,~ 220V±10％ |
| Compressed air | ≥ 0.40Mpa |
| Swing frequency | 100cpm (1.7HZ) |
| Swing angle | ± 0.5. ± 1 |
| Torque range | (0-5N. m, 0-10N. m, 0-20N. m) Automatic |
| Environmental temperature | 0-35 ℃, relative humidity<80% |
| Sulfurization time setting range | 2-300min, t90 is within the range of 10 seconds to 5 hours. |
| Print content | Date, time, temperature, vulcanization curve, temperature curve
ML,MH,ts1,ts2,t10,t90,Vc1 Vc2 |
| Dimensions | 600 * 700 * 1250mm |
