Summary:
The end caps are made to seal the plastic pipes such as PVC, PE,
PPR, ABS, etc when doing pipe inner pressure test.
It goes well with our XGY Pipe Hydrostatic Testing Machine as well
as your own model.
End caps
Our annual production capacity of end caps can reach tens of
thousand sets. The material of our end caps is 45# carbon steel or
304# stainless steel. We have several types of end caps, like end
seal, external seal and double seal, which fit different diameters
of pipes. We can also manufacture special end caps according to your test
requirements.
Models:
For metric pipes:
φ10, φ16, φ20, φ25, φ32, φ40, φ50, φ63, φ75, φ90, φ110, φ125, φ140,
φ160, φ180, φ200, φ225, φ250, φ280, φ315, φ355, φ400, φ450, φ500,
φ560, φ630, φ710, φ800, φ900, φ1000, φ1100, φ1200, φ1500, φ2000mm.
For inch pipes:
1/2", 3/4", 1", 11/4”, 11/2”, 2”, 21/2”, 3", 4", 6", 8", 10", 12", 14", 16", 18", 20", 22", 24", etc.
Meet standards:
| ASTM D1598-2004 | Pipe, Plastic, Under Constant Internal Pressure, Time-to-Failure of
(No S/S Document) |
| ASTMD1599 | Standard Test Method for Resistance to Short-Time Hydraulic
Pressure of Plastic Pipe, Tubing, and Fittings |
| ASTM D1599 | Standard Test Method forResistance to Short-Time Hydraulic Pressure
of PlasticPipe, Tubing, and Fittings1 |
| ISO1167 | Thermoplastic pipes, joints and assemblies for fluid transport.
Determination of internal pressure resistance |
| ISO13479 | Determination of resistance of polyolefin pipes for the conveyance
of fluids to crack propagation |
| ISO9080 | Plastics piping and ducting systems - Determination of the
long-term hydrostatic strength of thermoplastics materials in pipe
form by extrapolation (ISO9080, Ed. 1.0 (2003) MOD) |
| DIN EN 921 (1995-01) | Thermoplastics pipes - Determination of resistance to internal
pressure at constant temperature |
Design feature:
1.Include bolt, O ring ,vent valve etc all assembly
complete(Interface thread size can be customized).
2.Fixture structure:
Half round pot form,easy fit out , no leakage, convenient
operation.
3.Equiped with reinforcement structure.
Technical parameter:
| Max. Diameter (mm) | φ435 |
| High of one end (mm) | 385 |
| Wright of one end (KG) | 90 |
| O ring size (mm) | φ430*16 |
| Max.pressure (Mpa) | 10 |
| Nominal value (Mpa) | 7 |
Configuration
1. The bolts 1 set
2. Vent valve 1 piece
3. Connector 1 piece
4. Seal rings 1 set
