The hydrostatic testing equipment fully complies with the
requirements of GB/T6111, ISO 1167-1, GB/T15560, ASTM D1598, ASTM
D1599 standards, and is suitable for hydrostatic pressure test and
bursting test on various plastic pipes for fluid transportation.
The product has the characteristics of simple structure, high
precision, good stability and convenient operation. It is an
essential testing instrument for quality inspection departments of
various research institutes and pipe manufacturers.
Ⅱ. System Feature:
1. Industrial chip control, direct control.
2. The machine and "precision pressure control unit" multi-channel
combination.
3. Each station is independently controlled without interference.
4. 3 stations, 6 stations, 15 stations, 20 stations and other
multiple stations can be selected, up to 60 stations and above.
There are hydrostatic test and blasting test.
5. Max. pressure: 10, 16, 20MPa ...
6. Pipe diameter range: Φ16 ~ 2000mm can customized.
7. One microcomputer control one working position, it can
separately set and control pressure, accuracy, time and other
parameters while the computer does not work. Real-time display
pressure, time and status (8 statuses: pressure rise, pressure
compensate, pressure release, over- pressure, run, test over,
leakage, burst) and also store these test data. It is also equipped
with sound and light alarm when over-pressure, test over, leakage
or burst happens.
8. Power protection, test report storage / print output and other
functions. Automatically determine the effective time, invalid
time, the remaining time and other parameters, to prevent the
evening, holidays and other periods of failure time, invalid time.
9. When power-down time ensure that the test is accurate and smooth
completion. Instrument structure is reasonable, stable performance,
easy operation, display intuitive.
10. Rich software interface (multi-language environment to meet
customers in different countries and regions.
Ⅲ. Meet standards:
ISO1167, ISO9080, EN921, ASTMD1598, ASTMD1599 ISO13479
Ⅳ. Technical parameters:
| Model | XGY-10C |
| Max.pressure | 10MPa |
| Test stations | 3, 5, 10, 15, 20, 25, 30, 50 can customized |
| Control mode | computer control |
| Data preservation | Each station has power off data protection function, boot can be
restored |
| Time | timing time | 0~9999 h 59 min |
| Timing accuracy | ±0.1% |
| time resolution | 1s |
| Minimum Set Unit | min |
| Pressure | Pressure control range | 0.2~10MPa |
| Pressure indicator units | MPa,bar or PSI |
| Pressure control accuracy | -1%~ +2% |
| Constant Voltage Control Precision of Full Load Range | Within ±1% |
| Pressure display resolution | 0.001MPa,0.01bar or 1PSI |
| measuring range | 4%~100%FS |
| Allowable error limit for indication | Within 1% |
| Temperature | Control Range(with Refrigeration system) | 15-95℃ |
| Control accuracy | ±0.5℃ |
Ⅴ. Configuration:
1. Pressure control host;
2. Pressure station;
3. End closures;
4. Water tank;
5. Cooling system.
