Charpy Impact Test Machine XJJ-50J Impact Speed Tolerance ≤±0.05%
for
Accurate Material Testing
Product Description:
This test machine is mainly used for the determination of impact
toughness of hard-plastic materials (including plate, pipe, plastic
special profile), reinforced nylon, FRP, ceramics, cast stone,
electrical insulating materials and other nonmetallic materials.
Widely used in the chemical industry, scientific research units,
colleges and universities quality testing and other departments.
This instrument is an impact test machine with simple structure,
convenient operation and accurate and reliable data. Please read
the instructions in detail before use.
The instrument is equipped with a 7-inch full color touch screen,
input the size of the sample, calculate the impact strength and
data preservation according to the energy loss value automatically
collected. The machine is equipped with a USB output port, which
can export the data directly through the U disk, open the data
directly on the PC, and edit and print the experiment report.
Working Principle:
Strike the sample supporting the horizontal beam with the pendulum
hammer of known energy, and destroy the sample by one shock of the
pendulum hammer. The impact line is located in the middle of the
two supports, to impact the energy difference between the pendulum
before and after, to determine the energy absorbed by the sample
when destroyed. The impact strength is then calculated according to
the original cross-sectional area of the sample.
Instrument characteristics:
The instrument adopts high hardness and high precision bearing, and
adopts unaxial photoelectric sensor, fundamentally eliminate the
loss caused by friction, to ensure that the friction energy loss is
far less than the standard requirements.
According to the impact situation, the intelligent prompt working
status, always and the experimenter interaction, to ensure the
success rate of the test.
Meet standards:
ISO179,GB/T1043,GB/T2611.
Technical parameter:
| Impact velocity | 3.8m/s |
| Impact energy | 7.5J,15J；25J,50J (7.5 and 15 for one, 25 and 50 for one) |
| Maximum friction for the loss of energy | <0.5% |
| Preraised Angle | 150±1° |
| Strike center distance | 395mm |
| Pendulum moment | T7.5=4.01924Nm, T15=8.03848Nm, T25=13.39746Nm, T50=26.79492Nm |
| Clip spacing | 60mm 70mm 62mm 95mm |
| Impact blade round Angle | R2mm±0.5mm |
| Measuring Angle Accuracy | 1’ |
| Precision | 0.05% of the indicated value |
| energy unit | J,kgmm,kgcm,kgm,lbft,lbin(Can replaceable) |
| Temperature | -10℃～40℃ |
| Power | 220VAC-15%～220VAC+10%, 50Hz (single-phase three wire system ) |
Applications:
The Impact Testing Machine is used in various applications, such
as:
- Material Testing - It is used to test the impact resistance of
different materials, including metals, plastics, composites, and
ceramics.
- Product Development - It is an essential tool for product
development, ensuring the durability and safety of new products.
- Quality Control - It is used in quality control processes to ensure
that products meet the required impact resistance standards.
- Research and Development - It is used in research and development
to study the impact behavior of different materials and improve
their properties.
Packing and Shipping:
For the packaging of our Impact Testing Machine, we use
high-quality materials to ensure the safety and protection of the
product during transportation. The machine is first wrapped in a
layer of bubble wrap and then placed in a sturdy cardboard box. The
box is then sealed with strong tape to prevent any damage during
shipping.
The dimensions and weight of the package will vary depending on the
specific model of the Impact Testing Machine. However, we make sure
that the package is compact and lightweight to reduce shipping
costs.
For international shipping, the machine will be placed in a wooden
crate for extra protection. All necessary shipping documents and
labels will be included in the package.
We work with reliable and efficient shipping carriers to ensure
timely and safe delivery of our Impact Testing Machine. Customers
can also choose their preferred shipping method and we will do our
best to accommodate their requests.
Upon receiving the package, customers are advised to carefully
inspect the product for any damages. In case of any issues, please
contact our customer service team immediately for assistance.
FAQ:
Frequently Asked Questions
Q: What is the brand name of this product?
A: The brand name of this product is JHH.
Q: What is the model number of this product?
A: The model number of this product is XJJ.
Q: Where is this product manufactured?
A: This product is manufactured in Beijing, China.
Q: What certifications does this product have?
A: This product is certified with ISO and CE.
Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 1 set.
